The centralized feeding system is one of the essential equipment in the modern manufacturing industry. Its main function is to evenly transport raw materials to each production line for processing. When using the central feeding system, in order to ensure its normal operation, certain operating procedures must be followed, and its daily operation and maintenance must be carried out.
What are the precautions for troubleshooting the central feeding system?
1. Electrical failure
Electrical faults are one of the common types of faults. When using the central conveying system, there may be electrical problems such as motor power overload, loose terminals, poor contact of motor terminals, and equipment switches. Therefore, it is necessary to regularly check the electrical components of the equipment and repair or replace them in time.
2. Mechanical failure
Mechanical failures mainly come from the conveying medium. Mechanical failures such as conveyor belts, tire rollers, and chains may fall off or break in the centralized feeding system. Therefore, it is necessary to regularly check mechanical parts, repair and replace severely worn mechanical parts, so as to avoid them. failure.
3. Sensor, controller failure
Since the central feeding system has many controllers and sensors, failures such as equipment switch failure, sensor failure, and controller short circuit may occur. When using the central conveying system, it is necessary to pay attention to regular inspections of the controller and sensors, and timely replacement and maintenance of abnormal components, so as to avoid system failures caused by them.
4. Prevent the inflow of impurities
Impurities are a common source of trouble in central feed systems and piping. In order to prevent impurities from flowing in, a filter screen or weighing device and other equipment can be added at the inlet to prevent impurities from entering and remaining in the pipeline and affecting the normal operation of the equipment.
The operation and maintenance of the centralized conveying system for plastic raw materials needs to be carried out regularly in order to improve its efficiency and work stability.
